Radium - EVO 7-8-9 Fuel Pump Hanger

SKU:
Radium - EVO 7-8-9 Fuel Pump Hanger

Radium - EVO 7-8-9 Fuel Pump Hanger

SKU:
Select Hanger
Fuel Pump Option
/
  • In stock, ready to ship
  • Inventory on the way

Click here to download installation instructions (PDF)

The Radium Engineering fuel pump hanger allows the use of 1 or 2 aftermarket pumps in the stock Mitsubishi Evo 7-8-9 fuel tank. 


The machined assembly drops-in the factory fuel tank replacing the OEM hold-down flange. A single 8AN male pump feed port and 6AN male return port simplify aftermarket -AN hose plumbing. However the preassembled adapter fittings are compatible with the OEM fuel lines. This system is ONLY compatible with the following pumps:

20-0345-00
Walbro F90000267
Walbro F90000274
Walbro F90000285

20-0345-10
AEM 50-1220 E85 pumps. 

The custom designed stainless electrical studs easily handle the high current demand that compact bulkhead connectors lack. These serviceable connections are properly sealed and impervious to all standard and exotic fuels. The low profile design keeps all wiring tucked nicely underneath the OEM cover plate. Nonconductive acorn nuts are provided to prevent any accidental short circuits. Furthermore the high quality in-tank wiring is insulated with chemically resistant ETFE. Electrical hardware is included for the fuel pump(s) and OEM level sender.

One major issue with the OEM EVO 7-8-9 fuel pump hanger is the restrictive return port and venturi jet pump. When using aftermarket high-flow fuel pumps the OEM jet pump becomes too restrictive creating unwanted backpressure in the regulator return line causing excessive fuel rail pressure. The Radium fuel pump hanger includes a venturi jet pump with a new integrated pressure-relief valve to minimize back pressure. 

All returning fuel from the pressure regulator and crossover hose exit the jet pump keeping the OEM gas tank baffle full for starvation protection.

Single pump applications can reuse the OEM fuel pump controller wiring but it is recommended to upgrade the OEM wiring as these high flow fuel pumps draw additional current requiring larger gauge wire. Select qty1 for single pump applications and qty2 for dual pump applications.

Features
-Anodized Aluminum Mounting Plate
-Venturi Jet Pump with Pressure Relief Valve
-8AN Male and OEM Compatible Pump Outlet Fittings
-6AN Male and OEM Compatible FPR Inlet Fittings
-Anodized Aluminum Dual Pump and Fuel Sender Bracket
-Electrical Hardware for Fuel Pumps and OEM Sender
-Fluorosilicone Duckbill Return Valve
-Submersible Rubber Fuel Hose
-Stainless Steel Hardware and Clamps

Pump Configuration Selection 

- There will be enough components included with this option to use 1 or 2 fuel pumps. Depending on the setup some parts will simply not be used (20-0345-10 shown below).

- A pliable fuel pump filter sock must be used for proper fitment.


NOTE: This kit eliminates the OEM hanger's "post" fuel pump filter. A low micron aftermarket fuel filter should be installed downstream to protect the injectors from debris. NOTE: the optional fuel hanger plumbing kits listed below include this necessary post pump filter.

Option

20-0376-0X FUEL HANGER PLUMBING KIT EVO 7-8-9 
The plumbing kits include everything required to connect directly to an aftermarket (-8AN male) fuel rail and (-6AN male) FPR for both single and dual pump configurations.  This includes a pre-made PTFE -8AN feed line from the hanger up to the engine bay and the kit re-uses the factory feed line as the regulator return line.

PTFE -8AN hoses attach to a Radium Engineering fuel filter that mounts underneath the vehicle using a specifically designed EVO 7-8-9 bolt-on bracket.

Depending on the kit selected (-01-03-05) the fuel filter will be assembled with 1 of 3 different elements. Go HERE for more filter element information. 

INCLUDES
-Fuel Filter (-03 Stainless or -05 Microglass)
-Black 8AN Male Adapter Fittings (x2)
-Billet Aluminum 60mm Filter 2-Piece Clamp
-Aluminum EVO 7-8-9 Filter Bracket
-8AN PTFE Fuel Feed Hose Replacement (x2)
-6AN PTFE Fuel Return Replacement
-Vapor Shield Hose 6AN ORB Fitting and EFI Clamp
-Inverted Flare to 6AN Adapter Fitting
-Stainless Steel Hardware

"

Click here to download installation instructions (PDF)

The Radium Engineering fuel pump hanger allows the use of 1 or 2 aftermarket pumps in the stock Mitsubishi Evo 7-8-9 fuel tank. 


The machined assembly drops-in the factory fuel tank replacing the OEM hold-down flange. A single 8AN male pump feed port and 6AN male return port simplify aftermarket -AN hose plumbing. However the preassembled adapter fittings are compatible with the OEM fuel lines. This system is ONLY compatible with the following pumps:

20-0345-00
Walbro F90000267
Walbro F90000274
Walbro F90000285

20-0345-10
AEM 50-1220 E85 pumps. 

The custom designed stainless electrical studs easily handle the high current demand that compact bulkhead connectors lack. These serviceable connections are properly sealed and impervious to all standard and exotic fuels. The low profile design keeps all wiring tucked nicely underneath the OEM cover plate. Nonconductive acorn nuts are provided to prevent any accidental short circuits. Furthermore the high quality in-tank wiring is insulated with chemically resistant ETFE. Electrical hardware is included for the fuel pump(s) and OEM level sender.

One major issue with the OEM EVO 7-8-9 fuel pump hanger is the restrictive return port and venturi jet pump. When using aftermarket high-flow fuel pumps the OEM jet pump becomes too restrictive creating unwanted backpressure in the regulator return line causing excessive fuel rail pressure. The Radium fuel pump hanger includes a venturi jet pump with a new integrated pressure-relief valve to minimize back pressure. 

All returning fuel from the pressure regulator and crossover hose exit the jet pump keeping the OEM gas tank baffle full for starvation protection.

Single pump applications can reuse the OEM fuel pump controller wiring but it is recommended to upgrade the OEM wiring as these high flow fuel pumps draw additional current requiring larger gauge wire. Select qty1 for single pump applications and qty2 for dual pump applications.

Features
-Anodized Aluminum Mounting Plate
-Venturi Jet Pump with Pressure Relief Valve
-8AN Male and OEM Compatible Pump Outlet Fittings
-6AN Male and OEM Compatible FPR Inlet Fittings
-Anodized Aluminum Dual Pump and Fuel Sender Bracket
-Electrical Hardware for Fuel Pumps and OEM Sender
-Fluorosilicone Duckbill Return Valve
-Submersible Rubber Fuel Hose
-Stainless Steel Hardware and Clamps

Pump Configuration Selection 

- There will be enough components included with this option to use 1 or 2 fuel pumps. Depending on the setup some parts will simply not be used (20-0345-10 shown below).

- A pliable fuel pump filter sock must be used for proper fitment.


NOTE: This kit eliminates the OEM hanger's "post" fuel pump filter. A low micron aftermarket fuel filter should be installed downstream to protect the injectors from debris. NOTE: the optional fuel hanger plumbing kits listed below include this necessary post pump filter.

Option

20-0376-0X FUEL HANGER PLUMBING KIT EVO 7-8-9 
The plumbing kits include everything required to connect directly to an aftermarket (-8AN male) fuel rail and (-6AN male) FPR for both single and dual pump configurations.  This includes a pre-made PTFE -8AN feed line from the hanger up to the engine bay and the kit re-uses the factory feed line as the regulator return line.

PTFE -8AN hoses attach to a Radium Engineering fuel filter that mounts underneath the vehicle using a specifically designed EVO 7-8-9 bolt-on bracket.

Depending on the kit selected (-01-03-05) the fuel filter will be assembled with 1 of 3 different elements. Go HERE for more filter element information. 

INCLUDES
-Fuel Filter (-03 Stainless or -05 Microglass)
-Black 8AN Male Adapter Fittings (x2)
-Billet Aluminum 60mm Filter 2-Piece Clamp
-Aluminum EVO 7-8-9 Filter Bracket
-8AN PTFE Fuel Feed Hose Replacement (x2)
-6AN PTFE Fuel Return Replacement
-Vapor Shield Hose 6AN ORB Fitting and EFI Clamp
-Inverted Flare to 6AN Adapter Fitting
-Stainless Steel Hardware

"

Evolution Racing Spares aims to have fast turnaround time for processing and handling orders, and will always make every effort to get the order to you as soon as possible.

Small items: 1-3 Days via Express Post Satchel
Medium Sized Items: 2-3 working days via AusPost Express or Courier (Depending on location)

Large Items: 2-8 working days (Large items can only be sent via courier, and delivery time depends on both courier and location

- Delivery to rural or remote areas, NT, WA, and TAS may take longer.

- Express Post shipping is only valid to areas that fall within the express post zone and is not guaranteed.

- Evolution Racing Spares may use the quickest carrier/method for delivery regardless of the method chosen at checkout.

- Typical handling time for items that are in stock is approximately 24-48 hours, with delays during holiday periods and public holidays.

- Evolution Racing Spares is not responsible for lost or damaged orders when customers change the delivery instructions to "authority to leave."

All goods sold and work performed by Evolution Racing Spares come with a 3-month warranty with no questions asked.

In accordance with the Australian Consumer Law, we are not required to provide a refund or replacement if you change your mind.

You can choose a refund or exchange if an item has a major problem, including:

  • A problem that would have stopped you from buying the item if you had known about it
  • The item is unsafe
  • The item is significantly different from the sample or description
  • The item doesn't do what we said it would, or what you asked for and can't be easily fixed

Alternatively, you can choose to keep the item and we will compensate you for any drop in value.

  • If the problem is not major, we will repair the item within a reasonable time.
  • If the item is not repaired in a reasonable time, you can choose a refund or replacement.

Please keep your proof of purchase such as your receipt.

This site is protected by hCaptcha and the hCaptcha Privacy Policy and Terms of Service apply.

You may also like
More from Radium
More from Radium
Radium - EVO 8/9 Catch Can Kit
Radium - EVO 8/9 Catch Can Kit
Radium - EVO 8/9 Catch Can Kit
Radium - Mitsubishi EVO 7-9 Fuel Delivery System
Radium - Direct Mount Fuel Pulse Damper Kits
Radium - Direct Mount Fuel Pulse Damper Kits
Radium - Direct Mount Fuel Pulse Damper Kits
Radium - EVO 7/8/9 Fuel Filter Mount
Radium - EVO 7/8/9 Fuel Filter Mount
Radium - EVO 7/8/9 Fuel Filter Mount
Radium - EVO 7-8-9 Fuel Pump Hanger
Radium - EVO 7-8-9 Fuel Pump Hanger
Radium - Mitsubishi EVO 7-9 Fuel Rail Plumbing Kit
Radium - Mitsubishi EVO 7-9 Fuel Rail Plumbing Kit
Recently viewed
Back to Radium